Skip navigation
Menu
{{accountmenu.header.guest}}
Customer Service UK +44 203 695 7585
Customer Service NL/INT +31 224 210 062
T-pieces
HomeProductsT-piecesT-piece 90° KEN-LOK (RT9 / T9)

T-piece 90° KEN-LOK (RT9 / T9)

T-piece 90° KEN-LOK (RT9 / T9)
T-piece 90° KEN-LOK (RT9 / T9)
T-piece 90° KEN-LOK (RT9 / T9)

The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

Read more
Read less

This fitting has a KEN-LOK rubber seal with double lip (Soft-Edge) at the end of each spigot, so it can slide easily into a Spiralo duct.

Brochures
Certifications
Installation videos
RT9.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.008K

RT9.010.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.010.008K

RT9.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.010K

RT9.012.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.012.008K

RT9.012.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.012.010K

RT9.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.012K

RT9.015.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.015.008K

RT9.015.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.015.010K

RT9.015.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.015.012K

RT9.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.015K

RT9.016.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.016.008K

RT9.016.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.016.010K

RT9.016.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.016.012K

RT9.016.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.016.015K

RT9.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.016K

T9.018.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.018.008K

T9.018.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.018.010K

RT9.018.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.018.012K

RT9.018.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.018.015K

T9.018.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.018.016K

RT9.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.018K

RT9.020.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.020.008K

RT9.020.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.020.010K

RT9.020.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.020.012K

RT9.020.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.020.015K

RT9.020.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.020.016K

RT9.020.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.020.018K

RT9.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.020K

T9.025.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.025.008K

RT9.025.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.025.010K

RT9.025.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.025.012K

RT9.025.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.025.015K

RT9.025.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.025.016K

RT9.025.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.025.018K

RT9.025.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.025.020K

RT9.025K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.025K

T9.030.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030.008K

T9.030.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030.010K

T9.030.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030.012K

T9.030.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030.015K

T9.030.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030.016K

T9.030.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030.018K

T9.030.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030.020K

T9.030.022K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030.022K

T9.030.025K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030.025K

T9.030K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030K

RT9.031.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.031.008K

RT9.031.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.031.010K

RT9.031.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.031.012K

RT9.031.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.031.015K

RT9.031.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.031.016K

RT9.031.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.031.018K

RT9.031.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.031.020K

T9.031.022K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.031.022K

RT9.031.025K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.031.025K

T9.031.030K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.031.030K

RT9.031K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.031K

RT9.035.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.035.010K

RT9.035.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.035.012K

RT9.035.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.035.015K

RT9.035.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.035.016K

RT9.035.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.035.018K

RT9.035.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.035.020K

RT9.035.025K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.035.025K

T9.035.030K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.035.030K

T9.035.031K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.035.031K

T9.035K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.035K

RT9.040.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.040.010K

RT9.040.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.040.012K

RT9.040.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.040.015K

RT9.040.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.040.016K

RT9.040.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.040.018K

RT9.040.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.040.020K

RT9.040.022K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.040.022K

RT9.040.025K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.040.025K

T9.040.030K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.040.030K

T9.040.031K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.040.031K

T9.040K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.040K

RT9.045.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.045.010K

RT9.045.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.045.012K

RT9.045.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.045.015K

RT9.045.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.045.016K

RT9.045.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.045.018K

RT9.045.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.045.020K

RT9.045.022K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.045.022K

RT9.045.025K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.045.025K

T9.045.030K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.045.030K

T9.045.031K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.045.031K

T9.045.040K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.045.040K

T9.045K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.045K

RT9.050.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.050.010K

RT9.050.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.050.012K

RT9.050.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.050.015K

RT9.050.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.050.016K

T9.050.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.050.018K

RT9.050.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.050.020K

RT9.050.022K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.050.022K

RT9.050.025K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.050.025K

T9.050.030K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.050.030K

T9.050.031K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.050.031K

T9.050.035K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.050.035K

T9.050.040K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.050.040K

T9.050.045K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.050.045K

T9.050K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.050K

T9.056.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.010K

T9.056.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.012K

T9.056.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.015K

T9.056.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.016K

T9.056.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.018K

T9.056.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.020K

T9.056.025K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.025K

T9.056.030K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.030K

T9.056.031K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.031K

T9.056.035K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.035K

T9.056.040K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.040K

T9.056.045K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.045K

T9.056.050K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.050K

T9.056K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056K

RT9.063.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.063.012K

RT9.063.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.063.015K

RT9.063.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.063.016K

RT9.063.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.063.020K

RT9.063.025K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.063.025K

T9.063.030K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.063.030K

T9.063.031K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.063.031K

T9.063.035K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.063.035K

T9.063.040K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.063.040K

T9.063.045K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.063.045K

T9.063.050K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.063.050K

T9.063.056K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.063.056K

T9.063K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.063K

RT9.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.008K

RT9.010.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.010.008K

RT9.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.010K

RT9.012.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.012.008K

RT9.012.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.012.010K

RT9.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.012K

RT9.015.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.015.008K

RT9.015.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.015.010K

RT9.015.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.015.012K

RT9.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.015K

RT9.016.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.016.008K

RT9.016.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.016.010K

RT9.016.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.016.012K

RT9.016.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.016.015K

RT9.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.016K

T9.018.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.018.008K

T9.018.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.018.010K

RT9.018.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.018.012K

RT9.018.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.018.015K

T9.018.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.018.016K

RT9.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.018K

RT9.020.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.020.008K

RT9.020.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.020.010K

RT9.020.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.020.012K

RT9.020.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.020.015K

RT9.020.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.020.016K

RT9.020.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.020.018K

RT9.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.020K

T9.025.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.025.008K

RT9.025.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.025.010K

RT9.025.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.025.012K

RT9.025.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.025.015K

RT9.025.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.025.016K

RT9.025.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.025.018K

RT9.025.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.025.020K

RT9.025K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.025K

T9.030.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030.008K

T9.030.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030.010K

T9.030.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030.012K

T9.030.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030.015K

T9.030.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030.016K

T9.030.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030.018K

T9.030.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030.020K

T9.030.022K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030.022K

T9.030.025K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030.025K

T9.030K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.030K

RT9.031.008K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.031.008K

RT9.031.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.031.010K

RT9.031.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.031.012K

RT9.031.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.031.015K

RT9.031.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.031.016K

RT9.031.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.031.018K

RT9.031.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.031.020K

T9.031.022K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.031.022K

RT9.031.025K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.031.025K

T9.031.030K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.031.030K

RT9.031K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.031K

RT9.035.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.035.010K

RT9.035.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.035.012K

RT9.035.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.035.015K

RT9.035.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.035.016K

RT9.035.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.035.018K

RT9.035.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.035.020K

RT9.035.025K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.035.025K

T9.035.030K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.035.030K

T9.035.031K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.035.031K

T9.035K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.035K

RT9.040.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.040.010K

RT9.040.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.040.012K

RT9.040.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.040.015K

RT9.040.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.040.016K

RT9.040.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.040.018K

RT9.040.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.040.020K

RT9.040.022K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.040.022K

RT9.040.025K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.040.025K

T9.040.030K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.040.030K

T9.040.031K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.040.031K

T9.040K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.040K

RT9.045.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.045.010K

RT9.045.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.045.012K

RT9.045.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.045.015K

RT9.045.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.045.016K

RT9.045.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.045.018K

RT9.045.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.045.020K

RT9.045.022K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.045.022K

RT9.045.025K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.045.025K

T9.045.030K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.045.030K

T9.045.031K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.045.031K

T9.045.040K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.045.040K

T9.045K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.045K

RT9.050.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.050.010K

RT9.050.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.050.012K

RT9.050.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.050.015K

RT9.050.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.050.016K

T9.050.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.050.018K

RT9.050.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.050.020K

RT9.050.022K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.050.022K

RT9.050.025K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.050.025K

T9.050.030K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.050.030K

T9.050.031K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.050.031K

T9.050.035K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.050.035K

T9.050.040K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.050.040K

T9.050.045K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.050.045K

T9.050K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.050K

T9.056.010K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.010K

T9.056.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.012K

T9.056.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.015K

T9.056.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.016K

T9.056.018K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.018K

T9.056.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.020K

T9.056.025K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.025K

T9.056.030K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.030K

T9.056.031K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.031K

T9.056.035K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.035K

T9.056.040K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.040K

T9.056.045K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.045K

T9.056.050K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056.050K

T9.056K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.056K

RT9.063.012K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.063.012K

RT9.063.015K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.063.015K

RT9.063.016K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.063.016K

RT9.063.020K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.063.020K

RT9.063.025K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RT9.063.025K

T9.063.030K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.063.030K

T9.063.031K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.063.031K

T9.063.035K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.063.035K

T9.063.040K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.063.040K

T9.063.045K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.063.045K

T9.063.050K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.063.050K

T9.063.056K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.063.056K

T9.063K T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° KEN-LOK (RT9 / T9) The RT9/T9 is a T-piece with a 90° angle. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

T9.063K

Item codeStockd1d3ll1l3lp1lp3rBox #Pallet #Weight
RT9.008K√8080168847035358302400.34
RT9.010.008K√10080168847035359362160.41
RT9.010K√100100168847635359321920.44
RT9.012.008K√12580168849435358101200.49
RT9.012.010K√1251001688482353511241440.51
RT9.012K√1251251889482353510281120.56
RT9.015.008K-1508017286106353598960.58
RT9.015.010K√1501001688410235351020800.59
RT9.015.012K√1501252181099335351420800.70
RT9.015K√15015021810910635351416640.75
RT9.016.008K√16080168841103535914840.61
RT9.016.010K√1601001688410735351121840.63
RT9.016.012K√16012521010510035351318720.73
RT9.016.015K-1601503121561123535144480.98
RT9.016K√16016022811410935351416640.82
T9.018.008K-1808017286136434314560.81
T9.018.010K-180100216108147434310400.97
RT9.018.012K√18012521010511035351114560.79
RT9.018.015K√18015026013011035351610400.95
T9.018.016K√180160288144155434335351.25
RT9.018K√18018024412212835351210400.97
RT9.020.008K-20080140701123535915600.67
RT9.020.010K√20010021010511035351312480.87
RT9.020.012K√20012521010511835351012480.88
RT9.020.015K√2001503081541203535168321.15
RT9.020.016K√20016022411212835351212480.96
RT9.020.018K-2001803071531253535228321.40
RT9.020K√2002002681341263535836361.15
T9.025.008K-25080172861715343111.15
RT9.025.010K√2501001758713545351136361.00
RT9.025.012K√2501251989915245351134341.10
RT9.025.015K-25015025812914045351619191.30
RT9.025.016K√25016022411215045351124241.20
RT9.025.018K-25018030615315045352221211.60
RT9.025.020K√25020030815414345351122221.60
RT9.025K√25025032016015345451018181.70
T9.030.008K-30080196982075343111.45
T9.030.010K-3001002021012015343111.50
T9.030.012K-300125235118205534316161.70
T9.030.015K-3001502761382125343111.90
T9.030.016K-3001602861432125343111.95
T9.030.018K-3001803021512115343112.05
T9.030.020K-300200332166216534312122.20
T9.030.022K-3002243851932305353112.55
T9.030.025K-300250408204228535310102.70
T9.030K√3003004422212215353882.85
RT9.031.008K-315801638117245351021211.20
RT9.031.010K-315100178891694535821211.25
RT9.031.012K√31512531915917645351116161.85
RT9.031.015K-315150252126172453516111.60
RT9.031.016K√31516025812917645351216161.65
RT9.031.018K-31518030915418345352212121.95
RT9.031.020K√31520026913518345351116161.70
T9.031.022K-3152243811912375353112.65
RT9.031.025K√31525039819917845451612122.40
T9.031.030K-3153004802402515353113.25
RT9.031K√31531539019518045451110102.40
RT9.035.010K-3551001788918955358111.70
RT9.035.012K-35512521810919655351112121.90
RT9.035.015K-355150243121202553514112.10
RT9.035.016K√35516029914919655351412122.35
RT9.035.018K-355180304152202553520112.55
RT9.035.020K-35520030815419655351612122.50
RT9.035.025K√355250346173197554515882.80
T9.035.030K-3553004802402715353114.30
T9.035.031K-3553154612312515353554.10
T9.035K√3553555132572575353554.65
RT9.040.010K-4001001638121555351212121.80
RT9.040.012K-40012521310621655351112122.10
RT9.040.015K-40015026613322555351410102.45
RT9.040.016K√40016026613321855351410102.45
RT9.040.018K-40018030215123055351882.65
RT9.040.020K-400200344172218553516663.00
RT9.040.022K-400224338169222554515113.00
RT9.040.025K√400250400200219554515663.40
T9.040.030K-4003004762382875353114.70
T9.040.031K-4003154812412835353444.75
T9.040K√4004005982992995353445.90
RT9.045.010K-45010017587240553512112.10
RT9.045.012K-450125233116241553511882.50
RT9.045.015K-450150266133250553514112.75
RT9.045.016K-450160274137243553514662.80
RT9.045.018K-45018028014025555351662.80
RT9.045.020K-450200308154245553515663.10
RT9.045.022K-450224350175247554515113.40
RT9.045.025K-450250437218241554518334.10
T9.045.030K-4503004522263015353114.90
T9.045.031K-4503154912463125353335.30
T9.045.040K-4504005962983225353336.50
T9.045K√4504506383193195353226.80
RT9.050.010K-50010017587265553512442.30
RT9.050.012K-500125225112266553511442.70
RT9.050.015K-500150263131275553514443.05
RT9.050.016K-500160264132270553516443.05
T9.050.018K-5001803101553165343114.10
RT9.050.020K-500200303151270553515443.35
RT9.050.022K-500224324162272554515443.60
RT9.050.025K-500250386193266554518224.05
T9.050.030K-5003004782393385353115.80
T9.050.031K-5003154912463375353225.90
T9.050.035K-5003555512763485353226.60
T9.050.040K-5004005962983475353227.10
T9.050.045K-5004506503253515353227.60
T9.050K√5005007023513515353228.20
T9.056.010K-5601003321663965343114.90
T9.056.012K-5601253571793965343115.10
T9.056.015K-5601503821913965343115.40
T9.056.016K-5601603801903905343115.40
T9.056.018K-5601804002003905343115.60
T9.056.020K-5602003601803615343115.10
T9.056.025K-5602504102053615353115.60
T9.056.030K-5603004782393685353116.40
T9.056.031K-5603154952483715353226.60
T9.056.035K-5603555552783815353227.40
T9.056.040K-5604006003003815353227.90
T9.056.045K-5604506503253805353228.40
T9.056.050K-5605007103553865353229.10
T9.056K-5605607803903905353119.90
RT9.063.012K-630125225112331553511223.90
RT9.063.015K-630150264132340553514113.80
RT9.063.016K-630160266133335553516223.80
RT9.063.020K-630200358179339553523224.80
RT9.063.025K-630250398199327554516225.10
T9.063.030K-6303004802404065353117.10
T9.063.031K-6303154912464035353227.20
T9.063.035K-6303555752884265353228.50
T9.063.040K-6304006003004165353118.70
T9.063.045K-6304506503254165353119.30
T9.063.050K-63050071035542153531110.10
T9.063.056K-63056077038542153531110.80
T9.063K-63063087243643653531112.20

Brochures

KEN-LOK Program
Brochure KEN-LOK The brand
Installation instructions KEN-LOK

Certifications

TÜV Rheinland Certificate Fittings

Installation videos


This video is not visible due to your cookies preferences.



This video is not visible due to your cookies preferences.


Contact
Air Spiralo BV
Lagedijkerweg 15
1742 NB Schagen
Netherlands
+31 224 296041
info@airspiralo.com
Route via Google maps
Menu
About us
KEN-LOK
Downloads
General delivery conditions
Follow us
News & updates in your inbox
© 2024 Air Spiralo Group
Contact
Air Spiralo BV

Lagedijkerweg 15
1742 NB Schagen
Netherlands
+31 224 296041
info@airspiralo.com

"We use cookies to facilitate your visit on our website. Read here our Privacy policy"