Skip navigation
Menu
{{accountmenu.header.guest}}
Customer Service UK +44 203 695 7585
Customer Service NL/INT +31 224 210 062
Damp proof - Ducts and fittings
HomeProductsDamp proof - Ducts and fittingsT-piece 90° damp proof KEN-LOK (RTDI9 / TDI9)

T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9)

T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9)
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9)
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9)

The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

Read more
Read less

Damp proofing and sound insulation in one. Suitable for ducting from the ventilation unit to the throughput, roof or wall. Prevents condensation. Reduces the plant's noise emission. Damp-proof ducts and fittings are suitable for heat recovery systems. This fitting has a KEN-LOK rubber seal with double lip (Soft-Edge) at the end of each spigot, so it can slide easily into a Spiralo duct damp proof.

Product information
Brochures
Certifications
Installation videos
RTDI9.010K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.010K

RTDI9.012K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.012K

RTDI9.015K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.015K

RTDI9.015.012K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.015.012K

RTDI9.016K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.016K

RTDI9.016.010K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.016.010K

RTDI9.016.012K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.016.012K

RTDI9.018K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.018K

RTDI9.020.012K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.020.012K

RTDI9.020.016K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.020.016K

RTDI9.020K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.020K

RTDI9.025K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.025K

RTDI9.031.025K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.031.025K

RTDI9.031K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.031K

TDI9.035K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

TDI9.035K

RTDI9.010K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.010K

RTDI9.012K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.012K

RTDI9.015K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.015K

RTDI9.015.012K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.015.012K

RTDI9.016K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.016K

RTDI9.016.010K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.016.010K

RTDI9.016.012K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.016.012K

RTDI9.018K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.018K

RTDI9.020.012K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.020.012K

RTDI9.020.016K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.020.016K

RTDI9.020K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.020K

RTDI9.025K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.025K

RTDI9.031.025K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.031.025K

RTDI9.031K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

RTDI9.031K

TDI9.035K T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.
T-piece 90° damp proof KEN-LOK (RTDI9 / TDI9) The RTDI9/TDI9 is a T-piece that has a 90° angle and 13 mm Armaflex elastomer foam insulation on the outside. The difference between the RT and the T is the construction of the branch, the RT has a pressed saddle and the T is made up of two moulded parts.

TDI9.035K

Item codeStockd1d3ll1l3lp1lp3rxBox #Pallet #Weight
RTDI9.010K-10010016884763535913110.47
RTDI9.012K√1251251889482353510138480.59
RTDI9.015K√150150218109106353514134320.80
RTDI9.015.012K-15012521810993353514135400.74
RTDI9.016K√1601602281141093535141319380.87
RTDI9.016.010K-160100168841073535111310800.67
RTDI9.016.012K√1601252101051003535131320400.77
RTDI9.018K-1801802441221283535121314141.05
RTDI9.020.012K-2001252101051183535101315150.93
RTDI9.020.016K√2001602241121283535121314281.00
RTDI9.020K√200200268134126353581312241.20
RTDI9.025K√2502503201601534545101314141.80
RTDI9.031.025K-31525039819917845451613662.55
RTDI9.031K-315315390195180454511136122.55
TDI9.035K-355355513257257535313334.90

Product information

Product information KEN-LOK Damp proof

Brochures

KEN-LOK Program
Brochure KEN-LOK The brand
Installation instructions KEN-LOK

Certifications

TÜV Rheinland Certificate Fittings

Installation videos


This video is not visible due to your cookies preferences.



This video is not visible due to your cookies preferences.



This video is not visible due to your cookies preferences.


Contact
Air Spiralo BV
Lagedijkerweg 15
1742 NB Schagen
Netherlands
+31 224 296041
info@airspiralo.com
Route via Google maps
Menu
About us
KEN-LOK
Downloads
General delivery conditions
Follow us
News & updates in your inbox
© 2024 Air Spiralo Group
Contact
Air Spiralo BV

Lagedijkerweg 15
1742 NB Schagen
Netherlands
+31 224 296041
info@airspiralo.com

"We use cookies to facilitate your visit on our website. Read here our Privacy policy"